Continuing the second plank

Today I continued were I left it a few days ago.

The other part of the second plank was scarfed, trimmed and fine tuned....










.... and glued to the boat.

Tried another way of clamping the scarf joint with a piece of plywood, nicely protected with plastic tape, screwed on the joint.  On top of that a block of wood on top and also under the scarf with a clamp.

The epoxy squeeze out was used to fill some screw holes.


The other second plank was already copied on a piece of plywood and cut to the raw size. 

Subsequently I made the bevel and both gains.  As always the gain is the tricky part. 

The stringer was laying better than the other side so less planing needed.

Tomorrow I plan to glue the other plank